Gavin Allman asked 1 month ago
Ghost Immobiliser Installation
Add a ghost immobiliser to your car and protect it from thieves. Our TASSA-verified system protects against hacking, key cloning, and vehicle immobiliser bypass.
The system is hidden within the wiring loom of your vehicle, making it totally invisible to anyone who is looking. It is created by generating an e-pin code push sequence that is pushed through buttons already on the steering wheel, door cards and center console.
No circuit cuts
A car is a prized possession that you spend years of hard work to acquire, so it’s understandable why car owners would want to secure their vehicle from theft. Traditional security devices, like wheel locks or alarms, can be easily bypassed by thieves. A ghost immobiliser however is a very effective solution that works silently and isn’t easily detected by modern thieves.
A ghost immobiliser is a hidden device that connects to your vehicle’s CAN data network to disable the engine without the use of radio frequencies or key fobs. It communicates with the ECU of your vehicle via buttons on the steering wheel, dash and door panels. This generates a unique pincode that is only available to you. The code can be altered at any time and can be as long as 20 digits long, depending on what you prefer. It also comes with a safe emergency code that you can use if you forget your PIN.
The ghost immobiliser could also be used to block a relay box from transferring your car key’s signal from inside your home, which would open the doors and begin the vehicle. It could also block the latest techniques of stealing your vehicle, such as OBD port hacking. The device is small and weatherproof, which means it’s difficult to detect and is also difficult to alter with.
Another benefit of the ghost immobiliser is that it can be fitted to your vehicle without permanent marks. This is ideal for those who are planning to resell their car in the future. It is also much quicker and simpler to install as than a factory-fitted unit.
The Autowatch Ghost, a groundbreaking new generation device, stops thefts from cars that are not connected to a vehicle’s CAN network and using the buttons to generate a unique PIN code. It is a discreet device that can be put in with no wires cut and doesn’t require any additional key fobs. It also connects to the vehicle’s original ECU, preventing thieves from gaining access to it using an additional key or replacing the ECU with the use of a “relay”. This system is TASSA verified and Ghost immobiliser installation can be linked to an International Security Register, allowing owners to have confidence that their vehicles are protected against theft.
No RF scanning
If you’ve put a lot of time and money into the customisation of your vehicle, you’ll want to safeguard it from theft. Installing an immobiliser is among the best ways to stop theft. It will stop your vehicle from beginning until you enter an individual code. Using the buttons on your steering wheel as well as the dashboard, you can create a PIN up to 20 digits in length that is only accessible to you, and ensure that only you have access to your vehicle. It is also possible to set up a service or valet mode that allows you to start your car for a short period without entering the PIN. This allows technicians to work on your vehicle, without being present. This is a fantastic feature for those looking to save time and make their life easier.
Ghost immobilisers, a new generation device, connects to the CAN data network of your vehicle and utilizes the buttons on the dashboard as well as the steering wheel to set a PIN number. It is designed to be discrete, with no indicators or sounds to make it obvious and can be installed anywhere on the vehicle, without impacting the look of your prized possession.
This stealthy system is TASSA approved and could reduce the cost of insurance. It also has the ability to track that can track your vehicle even if it’s been stolen. This is useful if you have a costly or rare vehicle that you have invested lots of time personalising.
Autowatch Ghost, Ghost Immobiliser Installation in conjunction with the iPhone app, allows you to remotely start your car if you have forgotten your PIN or are unable to access your vehicle. This feature is ideal if you have to do some errands, or pick up your children, but do not want to let someone else drive your car. This feature is useful if you have to take your car to a mechanic to be repaired or serviced.
The Ghost has the advantage that it does not transmit or detect radio frequency which means it’s not detected by thieves who employ RF scanning and code grabbing techniques. It can also safeguard your car from key cloning and ECU swapping as well as other typical methods of theft from cars.
No key cloning
Ghost immobilisers are an excellent way to safeguard high-end cars and prevent key cloning. They stop your vehicle from starting until a PIN code has been entered with the regular key fob. This makes it very difficult for thieves to rob your vehicle, and may deter them from doing it in the first place. This is a great idea if your vehicle has been heavily modified or is an uncommon model.
The immobilisers are connected to the vehicle’s CAN data network and are completely hidden, meaning their presence isn’t obvious. The device is also difficult to identify by using radio frequency scanning technology or code grabbing. This means that a thief must spend a lot more time in order to steal your car.
To bypass the system, a thief must be aware of the unique pin code and the location of the Ghost. The pin code is unique to you and you can change it as many times as you need to. The pin code is simple for you to remember but mathematically impossible for anyone else to figure out. The engineer will also provide an emergency PIN code in case you forget the pin.
The Ghost CAN bus immobiliser is weatherproof and easily installed in any part of your vehicle. It is compatible with all vehicles and fully customisable to match the style of your car. It is also easy to use and is affordable. You can even transfer the device to a different vehicle if you switch vehicles during the course of ownership, providing that the new vehicle is compatible with it.
The CAN bus immobiliser is also compatible with a number of other security features. For example, it can detect damage to your vehicle and alert the owner. It also can stop the engine in the event that the vehicle is damaged. The system can also protect your vehicle from hacking and key cloning. It also detects vibrations or contact with the vehicle. In addition, it can notify the owner that the vehicle has been moved.
No OBD port hacking
Ghost utilizes a hidden module that is connected to the CAN data network of your vehicle. This stops thieves from hacking in to disable your alarm, deactivate your key fob, and code new keys. This technology is a significant improvement over the methods that were used by thieves to steal vehicles in the past. The CAN data networks means that your system will not be affected if you disconnect or change your battery.
The Autowatch Ghost, the first non-detectable CAN bus immobiliser aftermarket in the world, guards against key-cloning, hacking and replica car theft. It does not use LED indicators or key fobs. Instead, it utilizes the buttons on your steering wheel, console and door panels.
Modern thieves are able to utilize diagnostics to identify circuit breaks on your vehicle. They can bypass immobilisers that require a lot wiring or are integrated into the wiring. The Ghost is weatherproof and does not require any additional wiring. It cannot be identified by diagnostic tools that are professional. It can be installed even on vehicles with anti-theft devices.
A Ghost immobiliser also has a significant advantage: your vehicle will only be started by a person who knows your PIN code and physically has access to your vehicle. This is a significant benefit over traditional security systems which can be bypassed with simple cable manipulation, a screwdriver, or the utilisation of an universal remote controller.
If you forget your PIN you can easily reset it by using the emergency PIN override function on a mobile device or computer. This is useful in the event that you have to start your car when it’s been left in a garage, or the valet parking service.
The autowatch ghost immobiliser Ghost 2 is the most recent version of the product and is affixed to insurance by TASSA when installed by one of our authorized installers. It comes with the QR fingerprint system to identify parts that are not in use, which allows for the return of stolen items if they are discovered. It can also be turned into a service mode’ which permits the engine to start when your vehicle is parked in a garage or if you have valet parking, however, you must enter your PIN again to exit the car.