Kyle Rymill asked 4 months ago
Repairs to uPVC Windows
uPVC windows are an excellent option for modern homes. They are easy to maintain and are durable and long-lasting. They do not get rotten or rusty like aluminum and timber.
It is important to clean and oil UPVC doors and Upvc window repair windows on a regular basis. This will reduce repair costs and increase energy efficiency.
1. Broken Glass
The damaged glass in your windows can cause serious damage to your home, and could even be fatal. It is essential to make sure that your windows are in good condition.
For single pane windows it is fairly easy to replace them, and the new window is usually able to fit into the old frame very easily. If windows with double panes are joined by internal beading, it will be difficult to remove and replace the panes that were previously in use. In this instance you’ll need source some plastic spacers that will help the new pane to fit correctly into the frame of the window repair near me.
If you plan attempt to remove the window panes yourself it is crucial to wear the appropriate safety equipment that includes gloves with a thick layer of material and protective eyewear. You should also lay down a dropcloth before you begin working on the window panes, so that any shards fall on the fabric, Upvc window repair not onto the floor, where they could be trampled under.
Once the glass has been removed from the window, it’s best to cover the gap with some clear packaging tape or duct tape to prevent water and drafts from getting into the home until a professional comes out and repair the window. This will also act as a barrier, deterring any intruders to gain access to your home. If the distance between the door and the window is large, you might need to consider an alarm system that includes an opening. This will give you the best of both.
2. Sagging
uPVC windows and doors are a low-cost energy efficient, durable and long-lasting alternative to timber windows made of sash. However, over time they can suffer from a variety of issues like sliding. A window that isn’t properly aligned can cause problems with light, draughts, and even security. It’s crucial to act immediately if you realize that your uPVC windows are sagging.
To fix a window that is sagging you can try to reposition the hinges. To do this, you’ll need to open the window to access the frame. Then, you can remove the top and bottom hinges with a screwdriver and adjust them counter-clockwise or clockwise. Once you’ve adjusted the hinges, close the window and verify the fit. If you are happy with the size of the window, tighten the screws to hold them in the right position.
If you are unable to reposition the hinges you may require replacing the seal. Over time rubber seals can lose their elasticity and become dry and cause them to loosen. If this happens, it’s essential to replace the seal as soon as possible so that your uPVC windows remain watertight and draught-proof.
upvc Window repair handles may also loosen. This is typically caused by screws that have been removed over time, but it could be due to the mechanism of the handle wears out. It’s relatively simple to fix a loose uPVC handle. First, you’ll need close your window and do an initial test fit. The joint at the corner of the sash should be aligned with the joint on the casing. If it isn’t, you can make use of a screwdriver to loosen the handle and then return the mechanism to its original the position it was in.
3. Water Leaks
If you’re waking up to damp floors and mouldy walls each time it rains it is important that you take action. Water leaks through windows can cause structural damage to your home and hinder your ability to control the temperature inside your home. The most common reason for leaks in uPVC windows is that the sealant around the frame is damaged or not present.
This is a relatively easy fix and should be undertaken by any DIY expert. Depending on how severe the issue is, old caulking may need to be removed. It is essential to remember that when it is about uPVC window repairs, do avoid the temptation to “over-caulk in order to make the area more difficult to clean and reduce the efficiency of your energy.
Verify that the drainage holes have no debris in them and ensure that the sill pan has been properly angled to drain away from the window. In more extreme situations, you may have to replace the window.
Other indicators of long-term water leakage are decayed sills and the appearance of black spots of mold on the wall near the window. The fungus thrives in damp conditions and is able to quickly spread throughout the home.
If the leakage occurs between the double-glazed glass, it is more likely that the issue is related to the seal, not the frame. A uPVC specialist can easily solve this problem by replacing the glass seal. This will ensure the complete insulation of your windows.
4. Faulty Hinges
If your uPVC windows are stiff to open, or loose and open with ease it could be hinges that are at fault. These are easily repaired by any skilled DIYer and can usually be completed in a matter of minutes.
Like any mechanical part hinges will be damaged over time. Changing a window hinge is essentially a very simple process but it can be easier if you have someone to assist in holding the frame up.
It is also important to verify that the uPVC hinges are being opened and closed in the correct direction. Look for the arrows on each hinge to determine the direction in which the window should be opened.
The issue could be caused either by opening the window incorrectly or a faulty installation in the factory. This can often be resolved by sending us a photo via our website and we will be happy to give you advice.
It is also crucial to grease the hinges regularly. Applying an engineering lubricant that is light to the hinges is an ideal way to do this. We suggest using a lubricant that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can allow the window open and close more easily. It can also stop corrosion and reduce the risk of sticking. It is recommended to perform this every year. WD40 or other solvent-based oils are not recommended as they could damage your uPVC windows.
5. Draughts
Draughts can be caused by several different factors. The hinges can also be unbalanced due to wear, creating a gap where the sash and frame meet. If they’re beyond repair, it might be necessary to have them realigned. The interlock, which is on the hinge side of the window, can also become misaligned, again it’s feasible to give them a good clean, but in some cases it might be necessary to get them replaced.
These seals can wear down or become damaged over time, allowing air escape. Replacement of these with high-quality weatherstripping will help to stop draughts. Replace the upvc windows with low-emissivity glasses. This will help regulate indoor temperatures and lessen the possibility of draughts.
Lastly, one of the most effective ways to reduce the draughts in your home is to use a draught excluder. These are typically made of fabric filled with some sort of filler and can be positioned on the top of your windowsill. These will help to stop cold air from entering and keep your home warm and cozy!
With a bit of regular maintenance and repair your windows made of upvc will continue to provide a great level of insulation and security for your home. However, it is important to recognize that windows last for a certain period of time and eventually, they will reach a point where it is more efficient to replace them than repair them. If you are having issues with your upvc windows, it is best to seek professional assistance immediately.