Luisa Chowne asked 7 months ago
Replacement Upvc Window Handles
Almost all replacement window handles made of upvc include everything you require but if the original handle was fitted with screws or pins holding it, these will need to be removed. Take off the “snap-in” cover at the base of the handle.
Next you will need to identify the type of window and lock your new handle for This is vital!
Espag
Espag handles are a system of multipoint locks designed to fit on casement windows such as uPVC or wooden double glazing. The handle is fitted with a 7mm square shaft that is fitted into an uPVC gearbox. window. When the handle is turned it will activate a series of locks around the perimeter of the window. Espag handles are also referred to as shootbolt handles and offer extra security compared to the typical single point lock that is found on older frames.
They are available in a range of different options such as inline and cranked handle designs that can be used either left or right hand operation. You can even find a variety of sleek ergonomically designed handles that are made to enhance the feeling of the handle as well as how it looks on your windows.
You’ll need to measure the spindle size from the base of your uPVC handle if you want to order the correct replacement. This measurement, known as the step height, will help you select the perfect uPVC window screen replacement handle for your home.
It is possible to remove any screw covers that protect the screws that hold the handle in place, and if this is the case, you can use a screwdriver or pliers to take out the pins holding the handle. After removing the pins or screws that secure the spindle you can take it apart to disassemble the handle.
After you have removed the handle, you can open the locking mechanism in the frame of the windows and remove the cockspur block that is located next to the handle. This will allow the window to be opened. The new uPVC handles you have ordered will be able to slide onto the cockspur block and then into handle spindle to allow the window to reopen. If you’d like to make sure that your uPVC handles are properly secured you should replace the cockspur block with an entirely new one.
Cockspur
Cockspur handles are commonly found on older uPVC or Replacement Upvc window handles aluminium windows. The handle is closed and then turns onto a wedge-shaped plastic receiver catch. (Not to be confused with timber latches which are also covered in this section.) These handles can be lockable or non-lockable. They are available in different nose heights that can be adjusted to the frame.
The handle is secured by a small triangle-shaped spur (spur) which is fixed to the frame. These are generally one way handles, however a locking deadlock cylinder is a possibility to add security.
Like the Espag handles cockspur handle replacements are simple to put in place All you require is an additional set of screws (supplied) and the correct backset. The backset is the distance from the baseplate of the window to the underside of the handle’s nose. As a general rule Aluminium window frames tend to have a 9mm backset, while UPVC utilizes 21mm. There are many other variations though so it is important to take a measurement before purchasing the handle (see video below for how).
This kind of window handle can be changed by unscrewing the current handle and taking off the spindle, or in certain cases, the entire handle. The new handle is installed by using a pair of pozidrivs screws. The pozidriv screw is available in a brass or zinc finish to match existing hardware. There is also a choice for a self-locking pozidriv screw.
This cockspur handle is easy to install and is ideal for replacing or repairing old uPVC Windows. They have a universal design that makes them suitable for all backsets and profiles. Each handle comes with three packers of varying thickness. They are placed on the underside of the handle’s nose and can be used in various ways to create backsets of 9-13mm 17mm, 21mm, and 13mm. They are available in right and left handed versions and come in lockable or nonlockable versions with a choice of nose heights.
Tilt and turn
The most prestigious European window style with tilt and turn has been in use in Europe for decades, but it is only now starting to gain popularity in the American market. They combine the functionality of three different window styles into one – tilt, pivot, and in-swing. They are perfect for older homes because they provide more ventilation than standard windows.
When closed tilt and turn windows lock as the normal fixed window. By turning the handle either 90° or 180° depending on the type of tilt-and turn window the sash will slide to the outside and the window will tilt inwards to allow air exchange. This is an excellent way to let air circulate without opening an enormous windows that could be dangerous.
If the handle is turned 90or 180 degrees, the sash can be fully opened, much like a door. This allows for complete air circulation which is especially useful for draughty houses or rooms where smells or smoke are likely to accumulate. It also makes cleaning the outside of the glass much more easy because it can be done inside the home – a task that often requires precarious ladders.
Tilt-and turn windows are also secure. They are extremely difficult to open if locked in closed position. They also feature double seals that stop rainwater from entering your home when it is in the tilted position, or in swing. This feature is particularly useful for older homes, where burglars tend to target traditional windows which can be opened using side hinges.
Spade
There are several kinds of window handles that can be installed to double glazed windows made of Upvc. The two main kinds are Espag handles and Cockspur handles. There are also tilt and turn handles, spade or blade handles, and monkey tail handles. The type of handle you pick will be based on your preferences and the kind of windows you have.
You must be aware of how the handle you have currently is attached to the frame in order to choose the right replacement window glass near me Upvc handle. This is known as handing. It is a vital piece of information, especially when buying online as some handles aren’t suitable for all windows. For instance, certain cockspur handles are angled, Replacement Upvc Window Handles whilst others are straight and will turn left or right. You’ll also need the size of the spindle which is the distance between the base of handle and the head of the handle.
Another important part of choosing the correct handle is knowing whether your windows require a restrictor or not. These are usually used in high rise flats or commercial buildings, however they aren’t a requirement for the majority of homes. Additionally, you must consider step height which is the distance from the bottom of the screw plate to the nose of the handle.
The word spade comes from Old English spadu or spaedu and has been translated in several languages including German spaten and Low German Spathen. In the 1920s, during the Harlem Renaissance in New York City spade started to be used as a derogatory term for black people. The term has since come to prominence in pop culture and is a widely-respected symbol of African American heritage and pride.
When replacing the handle of a Cadenza handle, it’s essential that you get the right size. Handles are available in straight and angled versions that differ by just a few millimeters. The handle head can be shaped in a D or T shape, or even have no handles at all.